How to maintain the radial drilling machine?

How to maintain the radial drilling machine? Let's follow the Xiaobian of Weihao machine tool to learn about it.

1. Clean the appearance and dead corners of the machine tool, remove and wash all covers, and the inside and outside shall be clean, free of rust and yellow robe. The paint shall see the natural color and the iron shall see the light. Clean the guide rail surface and remove the burrs on the worktable. Check and supplement the screws, handball and hand board, and check the flexibility and reliability of each handle.

2. Maintenance of spindle feed box: check the oil quality, keep it in good condition, and the oil quantity meets the requirements. Remove the burr of spindle taper hole. Clean the hydraulic transmission system and oil filter screen and adjust the oil pressure.

3. Inspection of rocker arm and lifting clamping mechanism: check and adjust the lifting mechanism and clamping mechanism to achieve sensitivity and reliability.

4. Inspection of lubrication system: clean the linoleum. The oil cup shall be complete, the oil circuit shall be unblocked and the oil window shall be bright.

5. Cooling system inspection: clean the cooling pump, filter and cooling liquid tank. Check the coolant pipeline to ensure there is no water leakage.

6. Electrical system inspection: clean the dust inside and outside the motor and electrical box. Turn off the power supply, open the electrical door cover, and check whether the electrical connectors and electrical components are loose and aging. Check whether the limit switch works normally. Whether the door opening and power failure work. Check whether the hydraulic system is normal and whether there is oil leakage. Check whether all electrical control switches are normal.