What are the daily maintenance of CNC vertical lathe and CNC lathe?

Although the optical machine is a configuration of the lathe, it should also pay attention to maintenance when used with the NC vertical lathe

1. Each guide rail surface shall be cleaned and smooth every day. The machine tool with active smoothing system shall check and clean the active smoothing system on time, check the oil volume, increase the smoothing oil in time, and check whether the oil pump is started and stopped on time.

2. Check whether the operation of the spindle box active smoothing system is normal every day, and replace the spindle box smoothing oil on time.

3. Pay attention to check whether the cooling fan in the electrical cabinet operates normally, whether the air duct filter screen is blocked, and clean the attached dust.

4. Pay attention to check the cooling system, check the liquid level, add oil or water in time, and replace and clean when oil and water are dirty.

5. Check the spindle drive belt carefully and adjust the tightness.

6. Pay attention to check the tightness of the guide rail insert and adjust the gap.

7. Pay attention to check whether there is abnormal noise in the oil tank and oil pump of the hydraulic system of the NC vertical lathe, whether the operating oil level height is appropriate, whether the indication of the pressure gauge is normal, and whether there is leakage in the pipeline and joints.

8. Pay attention to check whether the guide rail and machine tool protective cover are completely useful.

9. Pay attention to check the mechanical accuracy of moving parts and reduce shape and orientation errors.

10. Clean the vertical car after work every day, clean the iron filings, wipe the coolant at the guide rail to avoid rust.

The machine works a lot every day. It is essential to guarantee and maintain it as much as possible.