How to Improve the Working Efficiency of Vertical CNC Lathe？

Small CNC vertical lathe is a kind of CNC lathe with smaller shape and size，mainly used for machining parts with various shapes and shapes, suitable for machining small-sized workpieces，it is suitable for mass production of small-sized workpieces，widely used in national defense industry, electronic appliances, machinery manufacturing, aerospace and other industries.

To improve the use efficiency of lathe, in practical production and application, we must first be familiar with it. Truly analyze the parts machined by lathe. Find out the material, structural characteristics and tolerance requirements of the parts. According to the analysis results, choose a reasonable milling machine,cutting process and concise processing route.

• Choosing the right tool can improve the machining efficiency of lathe..The machining capacity, process content, workpiece material and so on of the lathe need to be considered when selecting tools.The cutting tools selected for machine tools not only need high hardness, high wear resistance, enough toughness and high heat resistance. The process is good, the size is not disorderly, and the installation and adjustment are convenient. Therefore, new materials should be used. Materials are used for numerical control machining, and can be matched with workpiece size by optimizing tool parameters.

• 
  

• The datum point is the same as the datum point calculated by the program; Minimize clamping points，and set the clamping point in one position，machining all the surfaces to be machined, avoiding manual adjustment of the machining scheme by the machine, and filling.

  
  

• Vertical lathe manufacturer：Semi-finishing and finishing, under the condition of ensuring the processing quality，give consideration to both.When the tool moves in idle motion, a higher feed speed should be set. efficiency and economy and processing cost.The fixed value should be determined according to the machine tool simulation sheet, cutting parameter manual and practical experience.

• 
  

• 
  

• 
  

•